Upgraded Hardware: Dual hexa-core processor kvm vps hypervisor servers.

We’ll be starting off 2015 with some much needed hardware upgrades in our Raleigh, NC location. Over the next few months, we’ll be upgrading our existing Supermicro 1U servers to much larger 3U Supermicro servers on all virtualization nodes.

The Old:

  • Supermicro 1U chassis
  • Single power supply
  • 16GB-32GB RAM
  • Single Intel Xeon E3-1230 / E3-1270 OR dual L54XX OR dual L55XX quad core processors
  • Motherboards: X9SCM / X7DBU / X7DWU & X7DBR-E
  • LSI Hardware RAID w/ 512MB write cache & battery backup
  • 4 X Western Digital RE4 1TB HDD
  • RAID 10 hardware RAID arrays

The New:

  • Supermicro 3U Chassis
  • Redundant power supplies
  • 64GB-128GB RAM
  • Dual Intel Xeon E5-2620 v3 hexa-core processors
  • Motherboards: X10DRL-i
  • Areca 16 Port SAS RAID Cards w/ 2GB write cache & battery backup
  • 16 X Western Digital RE4 1TB HDD
  • RAID 10 hardware RAID arrays

Our typical virtualization node consists of a 1U Supermicro server configured with Dual Quad core processors, LSI RAID controllers & 4 Western Digital RE4 series disks in RAID 10 paired with 16GB, 32GB or 64GB RAM depending on the anticipated workload for the node.


Moving to larger storage arrays will increase both performance of storage read/writes as well as decrease restore times in the even of an array failure. In contrast, a 16 disk RAID 10 storage array would see a 4X performance increase over a typical 4 disk RAID 10 array. We anticipate 2-3gbps write times using our standard spinning disk RE4 WD10003FBYZ Western Digital 6gpbs interface drives.  This means virtual servers will see a near 4X performance increase on disk write speeds. The increase in spindles will increase the density capacity per-server with sustained disk I/O.

supermicro x10drl-i

We will continue our use of Western Digital RE series hard drives in all servers at this time for a number of reasons. All drives are the latest WD1003FBYZ series drives which feature SATA 3 connections, which pairs well with large hardware raid cards capable of large transfer rates.


Why not SSD? We get this question a lot, and it’s hard for many to understand the actual use cases with SSD hard drives. SSD’s are great however, we feel the need for higher fault tolerance by utilizing larger storage arrays fits the bill for us. The majority of our services are shared/reseller hosting & managed vitual servers, all of which are fine tuned by us for optimal performance. We can achieve much higher redundancy & fault tolerance by using larger storage arrays & similar performance to using a smaller number of SSD drives but the trade off is lower redundancy & fault tolerance. Density per node in terms of physical rack space usage due to larger chassis’ is not as important as fault tolerance & redundancy.

Raleigh, NC Web Hosting Now Available!


We’re pleased to announce the latest addition to our web hosting locations: Raleigh, North Carolina. This new location is in addition to our current services in Lenoir, North Carolina which will make 2 locations for service in the state of North Carolina.

We have expanded our shared & reseller hosting to the Raleigh area as of March 2014. Soon to follow will be Virtual Server (VPS) & Dedicated Server solutions.

Shared Hosting (USA):

Reseller Hosting (USA):